Rotary Tool Jeweler's Kits

Foredom's Jeweler's Kits come loaded with everything needed to jump-start your jeweler's bench and get to work with your projects using your choice of handpiece coupled with a Flex Shaft motor and a large selection of accessories. Take the guesswork out of your tool selection and begin work straight out of the box!

Specifications

Jeweler's kits come complete with a 1/6hp SR or 1/3hp TX motor, variable-speed foot pedal control, choice of handpiece, and 42-piece jeweler's accessory kit. Simply add your choice of standard motor hangar or Work Bench System and you are ready to go with your custom jewelery projects! You can further complete your bench with a wide selection of sintered diamond carving burs and bits for stone work, tungsten carbide bur sets to shape and refine your jewelry, and a selection of other rotary burs, bits, and brushes to suit the job at hand. Motors and speed controls are backed by a 2-year manufacturer warranty.

⚙️Maintenance kits and full tune-up kits are available when your flex-shaft starts to show signs of wear.

Select Your Motor

1. Series SR Motor is Foredom's most popular and best motor for general use. The 1/6 HP ball bearing hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It comes equipped with a motor bale for hanging, and the standard 39" long key tip inner shafting for connecting to Foredom's key tip handpieces.
2. Series TX Motor is Foredom's most powerful flex shaft machine with 1/3HP permanent magnet DC motors featuring the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets in place of the wound fields in universal-type Series SR motors that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, standard 39" long key tip inner shafting for connecting to any of Foredom's interchangeable handpieces If you intend to also use your flex shaft for gemstone carving the TX motor will provide the needed power to chew through any stone you throw at it.

Select Your Handpiece

1. The H.30 handpiece is the most popular Foredom handpiece featuring a #0 geared 3-jaw chuck that accepts any size shank or drill bit up to 5/32".
2. The H.20 quick-change handpiece has a slim ergonomic molded plastic front grip with tapered sides for easy and close handling during precision work.

Other Included Accessories

• Foot-operated variable speed pedal control in a heavy-duty plastic housing with an extra wide design.
• A-10081 Rotating Bur Holder multi-level organizer measures 7" wide by 4" high and features a center cup 2-3/4" diameter and 3" deep for storing small tools such as scribes, files, and screwdrivers. This 3-level organizer has 114 holes that hold 3/32" (2.35mm) shank carving and cutting burs. The lower level has 48 holes, 36 holes on the center level, and 30 holes on the top upper level.
• Flexible Shaft Grease for maintaining your investment.

Accessory kit

The AK11 accessory kit contains the following tools, or equivalents as substituted by Foredom when needed:

• A-40061 1 Platinum White, 1" Tube
• A-4516 6 Radial Bristle Disc, 3/4" dia, Pink, Pumice,1,200 Grit
• A-4912 3 Purple Ceramic Sanding Bands, 1/4"x 1/2", 60 grit
• A-4913 3 Purple Ceramic Sanding Bands, 1/4"x 1/2", 80 grit
• A-4914 3 Purple Ceramic Sanding Bands, 1/4"x 1/2", 120 grit
• A-4916 3 Purple Ceramic Sanding Bands, 1/4"x 1/2", 220 grit
• A-5517 1 Satin Finisher Red, Fine, 7/8" dia. x 1/4" thick, Mounted, 3/32" Shank
• A-5524 1 Satin Finisher, Tan, Coarse, 7/8" dia. x 1/4" thick, Mounted,3/32" Shank
• A-A1C 1 Rubber Bonded Abrasive, Wheel, 7/8" dia. x 1/8" thick, 1/16" Arbor Hole, Coarse, 40-60 Grit
• A-A1M 1 Rubber Bonded Abrasive Wheel, 7/8 x 1/8, 120 grit
• A-A1F 1 Rubber Bonded Abrasive Wheel, 7/8 x 1/8, 180 grit
• A-5523 1 Satin Finisher, White, Extra Fine, 1" dia. x 1/4" thick, Mounted, 3/32" Shank
• A-5520 1Fine Muslin Buff, Loose No Stiching, 1" dia. x 1/4" thick, Mounted with 3/32" Shank
• A-5595 1 Unitized Mounted Point, Taper, 3/8" x 3/4", Medium Grit, Hard Density, 3/32" Shank
• A-D2 1 Cut Off Disc, Fiberglass, 90 grit, 1-1/4"
• A-FB4-I 1 Felt Buff, Unmounted, 5/8"
• A-M1 1 Mandrel, Screw, 3/32" Shank & 1/16" arbor hole
• A-M13 1 Mandrel, Screw, Large Head, 3/32" Shank & 1/16" arbor hole
• A-MB1 1 Brush, Mounted, Cup, Bristle, 3/32" Shank
• A-MB2 1 Brush, Mounted, Wheel, Bristle, 3/32" Shank
• A-MB3 1 Brush, Mounted, Wheel, Bristle, 1/8" Shank
• A-MB4 1 Brush, Mounted, End, Brass, 3/32" Shank
• A-MB6 1 Brush, Mounted, Wheel, Brass, 3/32" Shank
• A-P3 1 Engraving Bur, Inverted Cone, .79mm, 3/32" Shank
• A-P7 1 Engraving Bur, Inverted Cone, 2.35mm, 3/32" Shank
• A-R2 1 Engraving Bur, Ball, .79mm, 3/32" Shank
• A-R7 1 Engraving Bur, Ball, 2.35mm, 3/32" Shank
• A-SD324 1 Rubber Sanding Drum Mandrel, 1/4" x 1/2", 3/32" Shank
• A-V357 1 V Stone Point, Cylinder, 1/4" dia. x 1/2" long, 3/32" Shank, 80 Grit

Manuals & Instructions Downloads